Elenco Electronics RCC-7K Guide de dépannage Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
PART IDENTIFICATION CARDS
To help identify the resistors and diodes used in the construction of your car we have
mounted the resistors, capacitors, diodes, and an inductor onto cards. The card will
help y
ou find the parts quickly. THE PARTS WILL NOT NECESSARILY BE LISTED IN
THE ORDER SHO
WN IN THE PARTS LIST SECTION OR IN THE ASSEMBLY
PROCEDURE.
When you are ready to assemble the car kit, follow the procedure shown. For an
e
xample refer to page 16. The first resistor called for is R13, 1k
resistor (bro
wn-
black-red-gold). Locate it on the card ( ), verify that it is the correct value. Some
resistors may be mounted backwards on the card so you must be certain that you are
reading the resistors correctly
.
When the correct v
alue has been established, only
then will y
ou mount it into its correct position on the PC board.
IDENTIFYING CAPACITOR VALUES
Capacitors will be identified by their capacitance value in pF (picofarads) or µF (microfarads). Most capacitors
will have their actual value printed on them. Some capacitors may have their value printed in the following
manner.
Second Digit
First Digit
Multiplier
Tolerance
The above value is 10 x 1,000 = 10,000pF or .01µF
The letter K indicates a tolerance of +
10%
The letter J indicates a tolerance of +5%
Note: The letter “R” may be used at times to
signify a decimal point; as in 3R3 = 3.3
IDENTIFYING RESISTOR VALUES
Use the following information as a guide in properly identifying the value of resistors.
BAND 1
1st Digit
Color Digit
Black 0
Brown 1
Red 2
Orange 3
Yellow 4
Green
5
Blue 6
Violet 7
Gray 8
White 9
BAND 2
2nd Digit
Color Digit
Black 0
Brown 1
Red 2
Orange 3
Yellow 4
Green
5
Blue 6
Violet 7
Gray 8
White 9
Multiplier
Color Multiplier
Black 1
Brown 10
Red 100
Orange 1,000
Yellow 10,000
Green
100,000
Blue 1,000,000
Silver 0.01
Gold 0.1
Resistance
Tolerance
Color Tolerance
Silver +
10%
Gold +5%
Brown +1%
Red +2%
Orange +3%
Green
+
.5%
Blue +
.25%
Violet +.1%
For the No.01234589
Multiply By 1 10 100 1k 10k 100k .01 0.1
Multiplier
1
2
Multiplier
Tolerance
-6-
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Commentaires sur ces manuels

Pas de commentaire